UNIQUE MOLD TURNER SYSTEMS
Systems for mold turning are used to safely turn the mold by 90 °. With our KCP / KCH mold turners you can turn the molds up to 15 tons. The main difference between KCP and KCH is the hydraulic drive.
The KCP mold turner is equipped with a unique hydraulic damping system, which ensures that the entire turning process is safe and smooth. With this type, you need to use the crane for turning.
The KCH mold turner is equipped with a hydraulic unit driven by an electric motor. The whole system is self-sufficient, and you don`t need any additional equipment for turning.
The main advantages of the mold turning systems are:
– high safety
– easy operation, manipulation, and training
– hard construction
– efficient space usage
– unique hydraulic damping system
– the possibility of the hydraulic drive
KCP / KCH |
5 000 |
10 000 |
15 000 |
Load |
5t |
10t |
15t |
Working area dimensions (mm) |
1 200 x 1 200 x 1 200 |
1 360 x 1 360 x 1 200 |
1 600 x 1 600 x 1 500 |
Total dimensions (mm) |
2 345 x 1 410 x 1 770 |
2 650 x 1 410 x 2 000 |
3 150 x 1 760 x 2 370 |